To begin cleaning a washing machine, turn the washer to its hottest setting, longest cycle, and the largest load. Fill the washer’s dispenser or drum with a mixture of baking soda and vinegar. The most popular ratio is ½ cup of baking soda with 4 cups of vinegar. Some people choose to use bleach instead of baking soda and vinegar, but this is much harsher. Additionally, never combine vinegar and bleach. Let the washer run for a little over a minute before adding a mixture. Once you’ve added it, let it run for a few more minutes to agitate the mixture. Stop the cycle and let the mixture and water soak for an hour. After the hour ends, let the washing cycle complete.

While waiting for the mixture and water to soak, you can take the time to clean the dispensers and edges of the washer. These are often the most filthy areas of the washing machine because they tend to accumulate leftover fabric softener and detergent. Because of this, it’s usually best to use an old toothbrush and heated vinegar to scrub the areas. Some washers have detachable dispensers, and you can soak them in vinegar separately.

Once the water drains away following the first cycle, you can prepare for the second cycle. For this cycle, use the same settings as before but don’t add any mixtures. You can add a small amount of vinegar if you wish, but it isn’t necessary. If you feel like you used too much vinegar in the first cycle, you can use some baking soda to negate it. Let the cycle run to completion and then open the washing machine door. Leave the door open for over an hour to let the washer dry completely. By opening the door, you’re making sure all of the leftover water evaporates.

After the second cycle, you can clean the drum itself. You should also take this time to wipe down the agitator in the center of the machine. Take a microfiber cloth and a small amount of vinegar. Gently wipe down the agitator and drum and remove any leftover stains or grime. If there are stains that you can’t get rid of, try creating a paste of baking soda and water. Use a non-scratching sponge and the paste to clean the stain. You may need to run another empty cycle to clean the remaining baking soda and vinegar.

If you’re a heavy user, consider cleaning your washing machine at least once a month. Alternatively, if you use your washing machine less frequently, you can wait longer between cleanings. The absolute minimum is two times a year. Maintaining a washer allows it to last longer and prevents any of your clothes from souring. Plus, it guarantees that you consistently get high-quality washes.

There are some key differences between cleaning a top-loading washing machine and a front-loading one. Notably, many front-loading washing machines do not allow you to stop them mid-cycle. Additionally, you can’t open the door and clean the interior during the first cycle. This also means that you have to add your cleaning mixture before letting the washer fill up slightly. Front-loading washing machines also have extra parts that may require cleaning.

One of the biggest differences between front-loading and top-loading washing machines is the presence of the door seal and gasket. You can wash down the exterior of these rubber seals with a microfiber cloth and some vinegar, but that may not be strong enough. Some washers allow you to remove them so you can soak them separately. Alternatively, you can soak some towels in vinegar and pack them into the gasket’s cavities. Let them soak for around an hour and then wipe the seal and gasket with your cloth. If necessary, you can use a toothbrush to remove residue and grime.

There are many things you can do to make your washer stay fresh longer. Leave the lid of a top-loading washing machine open after you finish a load of laundry. This will allow it to dry better and lowers the risk of mold or mildew. After you wash a particularly dirty load, wipe the drum and rinse it with water. Never store laundry products on top of your washer. Not only will they spill and ruin the washer’s finish, but a widespread spill could damage the electronic controls.

Many people wonder where the grime inside their washer comes from. For most washers, it’s leftover detergent. Some individuals tend to use too much detergent because they want their clothes to be extra clean. The washer can’t wash away all of the detergent, so it slowly accumulates on the drum and inside the dispensers. Almost all fabric softeners leave behind residue, as well. If you use fabric softener with all of your loads, you may need to clean your washing machine more often.

Occasionally, you may notice small brown spots on your clothes after you wash them. These spots may be rust. Use a flashlight and examine the inside of your washer. Look for chips in the finish or any obvious signs of rust. If you find it, there is no easy fix. You can buy a new washer or purchase a new washer basket. Unfortunately, both of these options are costly. You can also purchase kits to repair and repaint the coating, but this can be difficult. Choose whichever option is best for you.