For home crafters, there are four methods to make soap. Each one has positive points and challenges. Some methods are simpler, and others require specialized equipment. Familiarize yourself with the different methods so you can find the right recipe to try.

This is the easiest method and ideal for beginners who are starting to experiment with making their own soap. Essentially, you gently heat a shop-bought soap bar until it melts. An easy way is to heat the soap in a crockpot, or over low heat in a pan. Once melted, add your choice of ingredients. Popular options are essential oils, dried herbs or flowers, and colors. Finally, the melted soap is poured into a mold and leave at room temperature to set.

Similar to the melt and pour method, re-batching is an economical way to re-use old soap bars. This method also allows you to add your own ingredients to make a completely new soap bar. To try this process, grind up bars of soap with a cheese grater. Add a liquid like water or milk, and heat to combine. Once liquid, you can strain out solid ingredients floating in the mixture, and add new ones. This method is often used by home crafters who found their soap recipe didn’t work for some reason and wanted to try again.

The cold process method is the most common way that people use for home-made soap. Still achievable for beginners, this method does require specialist ingredients. However, the advantage of the cold process recipes is that you can really make a bar of soap completely from scratch. As the cold process needs a caustic ingredient called lye to work, it is not recommended for children.

To make cold process soap, these are the steps to follow: Cold process soaps include the ingredient lye, which can be dangerous if used carelessly. However, you have a lot of creative input with this method, so you can make exactly the kind of soap you want.

After stirring the lye, water, and heated oils together, the home soap maker looks for the trace. This is the point where the mixture is ready for extra ingredients and to be formed into new bars. If you pour too early, or too late, then the soap may not form properly. To test for trace, use a spoon or a spatula to drizzle some of the mixture back into your soap pot. If the line of liquid soap leaves a squiggly line you can see for a few seconds before disappearing; then you have a trace.

The hot process method of making soap is similar to the cold process, but with added heat. The advantage of adding heat is that the soap will be ready earlier as it needs less time to cure. Another positive for this method is the fragrance, and other additives are added later, so they don’t come in contact with the lye. Lye is harsh on delicate flowers and can discolor them, which does not happen with the hot process.

To make hot process soap:

Both the hot and cold process uses a mixture of lye and water to make soap. Remember that lye is a dangerous chemical, so you need to wear safety goggles and rubber gloves. Most home crafters use lye flakes, which are readily available in soap supply stores. To make the mixture, measure the exact amount of water and lye called for in the recipe. Always add the lye to the water – not the other way around and go slowly to avoid splashes. The mixture will heat up as you stir, continue stirring until the lye dissolves. Store the mixture in a secure container away from animals or children.

There's a 100% natural way you can try making soap that has no dangerous ingredients is to find a plant that does it for you. Several plants can be crushed up in water to make cleansing suds that work like soap. Some are wild-growing plants that you may find outside your home; others can be grown in a glasshouse. Soapwort is the best known, but you can also try clematis, yucca leaves, and bulbs of the amole plant.